My circuit project is a Nintendo Switch, it may look not like a Nintendo, I didn’t have enough time to finish the design, you can only see the leds. it looks like there are two leds on my project ( one is the white led under the red cover at the top left, another one is the red one under the white cover at the right bottom)so you have to think about the circuit diagram make sure they won’t distract each other or repel. As you can see my circuit diagram the positive part was connected together at the outside and negative at the outside. I chose Nintendo because I think Nintendo is quite challenging, that’s the reason why I chose Nintendo, my other design was the Youtube logo, but I think it’s too simple I wanted to do some thing challenging and that another reason is that someone had done it before, so I discard it, I wanted to do something unique. The most proud thing of this project is that it has a complicated circuit diagram, but it still provide a high quality product.
There are many things new and challenging to me. First I have zero experience at sewing, doing a backstitch, running stitch, tie on and tie off. And we have to light up the led by sewing, instead of making a paper circuit. I overcome them by practice again and again. I suggest next semester’s student be careful when you are threading, don’t go over another thread or it will get distracted. Also make the loop tighten(don’t make it too loosen)and make sure everything is working well(battery holder, battery and led). If you want to pick the thread out you can use the needle to pick it out. Based on this project I want to learn about multiple leds so far, and I want to learn about coding, e textile and making bigger and fascinating project.